Our Products
Stone Stop Resins
TaşStop® Water Based Decorative Stone Binder
TaşStop® is a water-based resin used in landscaping applications, mostly used to fix decorative stones. It can be applied with 3 methods: pouring, spraying and mixing. It has an extremely safe use thanks to its water-based structure. It can also be used for light pedestrian traffic when applied with the mixing method. Stones with a diameter of 4-10 mm are ideal for TaşStop®. The application thickness should be between 20-30 mm.
Isopave® Ultramax
Isopave® Ultramax, 1K is recommended to be applied with the ready-to-use method. It is a gravel ratio developed for medium pedestrian loads, gravel size and dust binding resin contained in gravel. It is between 3-5% of gravel weight depending on aliphatic polyurethane. It does not deviate due to its structure. It is environmentally friendly due to its intensive solvent-free formation and is compatible with pouring and spraying due to its plant consistency.
TaşStop® Ultra SLV Solvent Based Decorative Stone Binder
TaşStop® Ultra SLV is a solvent-based single component solvent-based resin used in landscaping applications. It is a strong binder that provides the fixation of decorative stones. It can be applied with 2 methods as pouring and mixing. However, it can also be applied with airless machines in professional applications. It can also be used for light pedestrian traffic when applied with the mixing method. It is ideal for use with stones with a diameter of 4-15 mm. In addition to its binding properties, it can also be used as a polish that makes the stones look shiny.
Pumice Coating Mortar
Cleaning is the biggest problem with pumice stones. Small garbage thrown on the stones and dry plant parts falling from trees get between the stones and cleaning them becomes very difficult. Dispersion due to pedestrian traffic, animal digging, strong winds cause pumice stones to spread on roads and unwanted areas of the landscape. The porous nature of the pumice stones' surfaces causes them to lose their stability and become dusty, shrink and disappear due to freezing and thawing, especially in continental climates. In this case, the stones must be changed every two or three years, which can put people and institutions with landscaping responsibility in a difficult situation.
Taş Stop pumice mortar is offered for sale in two-component, ready-mix sets as five-kilogram canisters and twenty-kilogram powder mixtures. If it is desired to be mixed in different weights outside the packaging, the mixing ratio should be 1 unit liquid and 4 units dry powder by weight. In the mixing process, the liquid should be added to the bucket first, and the powder should be added slowly to the liquid while the mixing process continues. When the color of the mortar is homogeneous, the pumice mortar can now be mixed with stones. The mixing ratio of the prepared mortar with stones is 3 units pumice for 1 unit mortar by weight. It should be checked that the pumice surfaces are completely covered with mortar, and the amount of mortar should be increased according to the need. Controlled water can be added to the prepared mixture. However, when too much water is added, the covering power of the product will decrease and the surface permeability of the pumice will increase. A drill and mixing bucket can be preferred for small areas, an isopave stone mixer for medium-sized applications or a pan mixer betonyer for large-scale applications.